zdobson
Apr 19, 09:43 AM
I'll try the suggestion of hooking up a monitor first. I'm currently formatting the HD to remove personal info, so I'll have to wait until after that.
What should I do with this machine? Should I replace the logic board? I found a used one for $100 on eBay (http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=120709976056#ht_1480wt_931). I'm planning to buy a new MBP and would like to get any money I can out of this.
What should I do with this machine? Should I replace the logic board? I found a used one for $100 on eBay (http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=120709976056#ht_1480wt_931). I'm planning to buy a new MBP and would like to get any money I can out of this.
bpaluzzi
Apr 7, 02:33 PM
All l'm saying is it didn't work.
It wasn't because of that line.
It wasn't because of that line.
harpster
Apr 7, 05:55 AM
I only had a few minutes this morning to look at this but I believe the main problem is your not calling the "mail" command. You have this line but it's not doing anything as it's just a variable...
$success = mail($webMaster, $emailSubject, $body, $headers);
If you just use this it should work...
mail($webMaster, $emailSubject, $body, $headers);
You may have other things to work out but this should send the email massage and you should be able to retrieve it at info@avenue19ni.com.
$success = mail($webMaster, $emailSubject, $body, $headers);
If you just use this it should work...
mail($webMaster, $emailSubject, $body, $headers);
You may have other things to work out but this should send the email massage and you should be able to retrieve it at info@avenue19ni.com.
OrangeSVTguy
Apr 18, 10:48 PM
You might even be able to swap the hard drive right into the new Mac and it should boot just fine depending on the age of the Intel if it can run the same software version. This is handy if you don't want to reinstall everything and keep your old settings and files.
more...
R94N
Nov 4, 10:35 AM
Quite a nice idea - one of the other forums I visit uses VBulletin software as well and it has the photos.
Young Spade
Apr 20, 05:44 PM
Well right now I have two computers; my MacBook and my windows PC. I had the PC before hand so all of my files were on that; when I got the Mac I transfereed all of the important things over (pictures, school documents), and kept the movies and things like that on the old computer.
I take my Mac with me, the PC stays at home. Everything I do now is on the Mac, however whenever I download movies, tv shows, things like that I watch them on the 19 inch monitor I have hooked up to the windows laptop.
However for transferring a few files between I use DropBox; great little program that syncs everything in a free 2gb folder to unlimited computers (and devices like Android, iPhone, iPod Touch, and iPad).
I take my Mac with me, the PC stays at home. Everything I do now is on the Mac, however whenever I download movies, tv shows, things like that I watch them on the 19 inch monitor I have hooked up to the windows laptop.
However for transferring a few files between I use DropBox; great little program that syncs everything in a free 2gb folder to unlimited computers (and devices like Android, iPhone, iPod Touch, and iPad).
more...
Vandam500
Apr 24, 10:57 AM
Where did you hear this from? A red iPhone? I highly doubt it.
Roger1
Oct 2, 06:04 PM
Here'e something to try:nvu
It's a new app that's out, and it's free. I haven't used it much, but it might be worth trying. Here's a link
www.nvu.com
good luck
It's a new app that's out, and it's free. I haven't used it much, but it might be worth trying. Here's a link
www.nvu.com
good luck
more...
zen.state
Mar 6, 05:41 PM
I have found what I feel is a great solution for people with slower G4's or people that just want the site to stop hogging all their CPU. I recently discovered a great free app called "Mactubes" and have quickly fallen in love with it. Using this on my G4 1.8GHz I have watched video of all different quality/resolution and the CPU consumption ranges from 17-36%. The even better thing is that you can watch, search and download every video on youtube without ever going to the website. Gives you a great player window also that makes it much more like watching vids in VLC or something.
These results I speak of require one specific setting in the apps preferences..
1. Download Mactubes here. (http://www.macupdate.com/app/mac/28608/mactubes) It supports 10.4.2+
2. Launch it then open preferences. Set the player type to Quicktime like the image I have attached shows. The window mentions near the bottom you need Safari 4+ but that is only for the "Video player" mode which uses html5 but without actually launching Safari. QT player setting uses even less CPU.
I have also tried the flash and video player setting and they use more CPU. The quicktime interface takes flash out of the equasion all together which is amazing. Virtually every video on youtube is a lowres h.264 with a flash (.flv) wrapper. The QT setting ignores the wrapper and plays the h.264. Even a G4 400+ can play low res h.264 without the flash crap.
Please share your results if you try this. :)
These results I speak of require one specific setting in the apps preferences..
1. Download Mactubes here. (http://www.macupdate.com/app/mac/28608/mactubes) It supports 10.4.2+
2. Launch it then open preferences. Set the player type to Quicktime like the image I have attached shows. The window mentions near the bottom you need Safari 4+ but that is only for the "Video player" mode which uses html5 but without actually launching Safari. QT player setting uses even less CPU.
I have also tried the flash and video player setting and they use more CPU. The quicktime interface takes flash out of the equasion all together which is amazing. Virtually every video on youtube is a lowres h.264 with a flash (.flv) wrapper. The QT setting ignores the wrapper and plays the h.264. Even a G4 400+ can play low res h.264 without the flash crap.
Please share your results if you try this. :)
Hexley
May 5, 01:08 AM
I see a lot of posts saying they'll wait for OS X Lion to come preloaded in the 2011 iMac before buying.
If you are doing this are you willing to wait another 4 months for this to happen?
Apple (and other companies) have been known to stretch out release dates to the end of a season or quarter. September 5 being seen as the end of Summer in the US leads me to believe Lion will be released around that time.
The time frame is based on conjecture of a worst case scenario.
If you are doing this are you willing to wait another 4 months for this to happen?
Apple (and other companies) have been known to stretch out release dates to the end of a season or quarter. September 5 being seen as the end of Summer in the US leads me to believe Lion will be released around that time.
The time frame is based on conjecture of a worst case scenario.
more...
simsaladimbamba
Apr 27, 06:00 PM
FW400 doesn't carry any power so no it's not going to work.
They do. That's why we had to send some DV decks back to Sony, as they were often kaputt due to the wrong order of connecting them to the computer.
FireWire 400 (IEEE 1394-1995)
The original release of IEEE 1394-1995[11] specified what is now known as FireWire 400. It can transfer data between devices at 100, 200, or 400 Mbit/s half-duplex data rates (the actual transfer rates are 98.304, 196.608, and 393.216 Mbit/s, i.e., 12.288, 24.576 and 49.152 megabytes per second respectively).[4] These different transfer modes are commonly referred to as S100, S200, and S400.
Cable length is limited to 4.5 metres (14.8 ft), although up to 16 cables can be daisy chained using active repeaters; external hubs, or internal hubs are often present in FireWire equipment. The S400 standard limits any configuration's maximum cable length to 72 metres (236 ft). The 6-circuit connector is commonly found on desktop computers, and can supply the connected device with power.
The 6-circuit powered connector, now referred to as an alpha connector, adds power output to support external devices. Typically a device can pull about 7 to 8 watts from the port; however, the voltage varies significantly from different devices.[12] Voltage is specified as unregulated and should nominally be about 25 volts (range 24 to 30). Apple's implementation on laptops is typically related to battery power and can be as low as 9 V.
from http://en.wikipedia.org/wiki/IEEE_1394_interface#FireWire_400_.28IEEE_1394-1995.29
They do. That's why we had to send some DV decks back to Sony, as they were often kaputt due to the wrong order of connecting them to the computer.
FireWire 400 (IEEE 1394-1995)
The original release of IEEE 1394-1995[11] specified what is now known as FireWire 400. It can transfer data between devices at 100, 200, or 400 Mbit/s half-duplex data rates (the actual transfer rates are 98.304, 196.608, and 393.216 Mbit/s, i.e., 12.288, 24.576 and 49.152 megabytes per second respectively).[4] These different transfer modes are commonly referred to as S100, S200, and S400.
Cable length is limited to 4.5 metres (14.8 ft), although up to 16 cables can be daisy chained using active repeaters; external hubs, or internal hubs are often present in FireWire equipment. The S400 standard limits any configuration's maximum cable length to 72 metres (236 ft). The 6-circuit connector is commonly found on desktop computers, and can supply the connected device with power.
The 6-circuit powered connector, now referred to as an alpha connector, adds power output to support external devices. Typically a device can pull about 7 to 8 watts from the port; however, the voltage varies significantly from different devices.[12] Voltage is specified as unregulated and should nominally be about 25 volts (range 24 to 30). Apple's implementation on laptops is typically related to battery power and can be as low as 9 V.
from http://en.wikipedia.org/wiki/IEEE_1394_interface#FireWire_400_.28IEEE_1394-1995.29
mgipe
Apr 26, 11:00 AM
I've frequently seen this when the plug is not fully inserted into the jack. It can take a fair amount of pressure to overcome that last detent in the jack.
more...
sparkyms
May 1, 01:56 PM
I don't think there any any improvements. I can make the issue happen at will. It never drops to 'no service' but always drops bars. Not really an issue to me, but I wouldn't be hopeful in getting a 'fixed' iP4.
Mousse
Apr 20, 11:34 AM
I like multi-computer setup. I've got a dual boot (Linux, WinXP) desktop for internet (linux), ripping videos and various minor tasks, and games (XP). The MacBook does photo editing. Lots of times, I'm using both computers at the same time.
more...
Buckit
Jun 18, 07:03 PM
Any one planning on camping out at Easton?
I'll probably be there around 5am... hopefully thats early enough to get one!
I'll probably be there around 5am... hopefully thats early enough to get one!
ccolaco
May 1, 05:04 PM
There has not been any concrete information because nothing official has been released. The only piece of official evidence is WWDC invites. There are however plenty of rumours swirling around.
This thread has you covered, all thats needed was a simple search.
http://forums.macrumors.com/showthread.php?t=1092467&highlight=ios5
This thread has you covered, all thats needed was a simple search.
http://forums.macrumors.com/showthread.php?t=1092467&highlight=ios5
more...
simsaladimbamba
May 4, 07:42 PM
MacBook 5.1
Hmm, maybe this applies then?
Standard RAM: 2 GB
Maximum RAM: 8 GB*
Details: 2 GB of RAM is installed as two 1 GB modules, no slots free.
*Apple officially supports a maximum of 4 GB of RAM. Originally, this model was only unofficially capable of stably supporting 6 GB of RAM, but as confirmed (http://blog.macsales.com/9102-secret-firmware-lets-late-08-macbooks-use-8gb) by site sponsor OWC, it is capable of supporting 8 GB of RAM if updated to Boot ROM Version MB51.007D.B03 and running MacOS X 10.6 "Snow Leopard."
from http://www.everymac.com/systems/apple/macbook/stats/macbook-core-2-duo-2.0-aluminum-13-late-2008-unibody-specs.html
Hmm, maybe this applies then?
Standard RAM: 2 GB
Maximum RAM: 8 GB*
Details: 2 GB of RAM is installed as two 1 GB modules, no slots free.
*Apple officially supports a maximum of 4 GB of RAM. Originally, this model was only unofficially capable of stably supporting 6 GB of RAM, but as confirmed (http://blog.macsales.com/9102-secret-firmware-lets-late-08-macbooks-use-8gb) by site sponsor OWC, it is capable of supporting 8 GB of RAM if updated to Boot ROM Version MB51.007D.B03 and running MacOS X 10.6 "Snow Leopard."
from http://www.everymac.com/systems/apple/macbook/stats/macbook-core-2-duo-2.0-aluminum-13-late-2008-unibody-specs.html
StealthRider
Apr 29, 04:28 PM
It probably fried the power button, then.
Heilage
Mar 31, 02:57 PM
I'm not saying Maddow isn't biased. I'm saying she's not bad in that she usually uses facts and doesn't cite distorted clips to back her points.
That is a major distinction. I like watching Maddow, she's very on point and no ********, it seems.
(But hey, I'm a commie liberal socialist ***** foreigner.)
That is a major distinction. I like watching Maddow, she's very on point and no ********, it seems.
(But hey, I'm a commie liberal socialist ***** foreigner.)
Richard14
Apr 6, 07:32 AM
Plug the external drive into your MacBook Pro, and open a finder window. The WD drive should show up in the left part of the finder window, under devices.
Right-click on the drive, and click on "Get Info".
In the Info window, part way down you'll see the format. For example:
Format: MS-DOS (FAT32)
or
Format: Mac OS Extended (Journaled)
or
something else for NTFS...
Remember, you can't reformat a drive (or a partition) without losing the files currently on that drive (partition). So, you MUST copy the files somewhere else, first.
I have checked and it is NTFS format. There is too much memory to copy onto my mac before reformatting. So then where else can i copy them too? For safety I can copy to another external hard drive which is NTFS, but will i then be able to move the data on to the newly formatted drive? Or just the stuff from my mac? Thanks so much for your help again
Right-click on the drive, and click on "Get Info".
In the Info window, part way down you'll see the format. For example:
Format: MS-DOS (FAT32)
or
Format: Mac OS Extended (Journaled)
or
something else for NTFS...
Remember, you can't reformat a drive (or a partition) without losing the files currently on that drive (partition). So, you MUST copy the files somewhere else, first.
I have checked and it is NTFS format. There is too much memory to copy onto my mac before reformatting. So then where else can i copy them too? For safety I can copy to another external hard drive which is NTFS, but will i then be able to move the data on to the newly formatted drive? Or just the stuff from my mac? Thanks so much for your help again
ITASOR
Dec 2, 09:51 PM
I would really like to get that price. I have never sold anything on eBay. How easy is it?
If you sell something on eBay, make sure to include nice, high resolution photos showing the computer and accessories from all different angles. People like pictures.
If you sell something on eBay, make sure to include nice, high resolution photos showing the computer and accessories from all different angles. People like pictures.
hasek3139
Jun 28, 03:19 PM
Im getting at my local att store at midnight. Yesterday they said they were getting a shipment in at 8am and 11am. They dont know definite numbers but they said more than last year and they got over 100 3gs last year :eek:
me to my friends and i r gonna campout around midnight! 7 hours of waiting but the end result will be worth the wait!
me to my friends and i r gonna campout around midnight! 7 hours of waiting but the end result will be worth the wait!
roadbloc
Mar 31, 02:12 PM
Was just wondering if that means it is already featured-locked.
As it is just a Developer Preview (version 2), it is far too early to tell.
As it is just a Developer Preview (version 2), it is far too early to tell.
Cybergypsy
Sep 2, 04:12 PM
But most people check the email a few times a day.........let us know :)
No comments:
Post a Comment