100Years
Apr 26, 10:43 PM
I'm running two Apple (Toshiba) SSDs, and an OWC Mercury Extreme; not the fastest out there, but plenty fast enough for my needs.
Anonymous Freak
Sep 12, 04:50 PM
If the stick physically fits, then it won't cause harm.
At best, it'll work great, running the stick out of spec.
At worst, the PC won't boot with the 'wrong' stick in there.
Most likely (all this is assuming a 'wrong' stick,) it will boot, but will boot slower than you want. For example, if it has an 866MHz processor, it might only boot at 650Mhz. (Because, for example, it uses a 133Mhz bus, and you put 100Mhz RAM in, so it would run the processor at only a 100MHz bus, dropping it's speed accordingly.)
Or, with lots of motherboards, the processor speed and RAM speed were independent, so it would run just fine, but the memory would run at the 'lowest common denominator' speed. This is especially true of newer DDR motherboards.
At best, it'll work great, running the stick out of spec.
At worst, the PC won't boot with the 'wrong' stick in there.
Most likely (all this is assuming a 'wrong' stick,) it will boot, but will boot slower than you want. For example, if it has an 866MHz processor, it might only boot at 650Mhz. (Because, for example, it uses a 133Mhz bus, and you put 100Mhz RAM in, so it would run the processor at only a 100MHz bus, dropping it's speed accordingly.)
Or, with lots of motherboards, the processor speed and RAM speed were independent, so it would run just fine, but the memory would run at the 'lowest common denominator' speed. This is especially true of newer DDR motherboards.
digitalduck
May 1, 08:09 PM
Just wondering if anyone can recommend a good app..thanks
iBoyfriend
Apr 24, 09:26 AM
lol, first the camera/phone/sms icons and signal bars, now you want an iPhone looking case? :P
Yup :)
Yup :)
more...
arcrius
Apr 9, 08:38 PM
now does this work for downgrading any ipod or iphone?
Yes it does! You just need to download the ipsw corresponding to the model of your device. Other than that the processes is exactly the same.
Yes it does! You just need to download the ipsw corresponding to the model of your device. Other than that the processes is exactly the same.
roadbloc
Apr 11, 05:19 PM
I gotta admit, it looks awfully similar.
more...
drummr
May 6, 03:30 PM
The thing with the loophole is, even the AT&T employees do it. Nobody cares and they won't do anything when you upgrade. All that matters is that you are grandfathered into it.
antster94
Jun 23, 01:03 PM
7.30pm?
It'll be in the morning, 7:30 AM should be fine.
It'll be in the morning, 7:30 AM should be fine.
more...
livingfortoday
Mar 20, 09:23 PM
Here's a similar project (http://www.clayj.com/html/BRVAIOBoy.htm) (although the description is not quite as detailed) on a Sony notebook, in case anyone wants to compare results.
The beauty of painting the iBook, in my opinion, though, is that since you can take off the shell and make it clear, you can paint the inside of it, therefore making it impossible to scratch off or damage any painting you do. I mean, the Vaio looks awesome and all, but you'd have to be darn careful with it. The down side is that you have to paint it like a mirror image, though, and you also have to paint the picture with the top layers first, which makes it kind of complicated.
But I mean, an iBook is an iBook... a Vaio... well, that's just a PC. :p
The beauty of painting the iBook, in my opinion, though, is that since you can take off the shell and make it clear, you can paint the inside of it, therefore making it impossible to scratch off or damage any painting you do. I mean, the Vaio looks awesome and all, but you'd have to be darn careful with it. The down side is that you have to paint it like a mirror image, though, and you also have to paint the picture with the top layers first, which makes it kind of complicated.
But I mean, an iBook is an iBook... a Vaio... well, that's just a PC. :p
Oirectine
Jun 16, 02:07 AM
I would kinda like to find a website where flame wars were cherished, trolls were honored, and bitter insults were extolled.
Of course, I appreciate and enjoy the close community that has formed here too much to want MacRumors to be that site, but I would like my occassional craving for flaming to be satisfied somewhere.
http://www.adequacy.org/ !
And, as much as I hate to say it, http://www.kuro5hin.org/ is full of jerkish trolls. *sigh*
PS: What do you have against Best Buy?
Of course, I appreciate and enjoy the close community that has formed here too much to want MacRumors to be that site, but I would like my occassional craving for flaming to be satisfied somewhere.
http://www.adequacy.org/ !
And, as much as I hate to say it, http://www.kuro5hin.org/ is full of jerkish trolls. *sigh*
PS: What do you have against Best Buy?
more...
crazzyeddie
Nov 15, 07:47 PM
Just a quick question... I downloaded the SMP Intel version for my MacBook Pro, but I can't figure out how to pause it! Last night I did a ctrl-c (quit) and it closed out... but this morning it started all over! What on earth is the "pause" command?
(yes I know I don't need to stop it for most things, but I like to at night and while I study because of the extra noise it creates.)
(yes I know I don't need to stop it for most things, but I like to at night and while I study because of the extra noise it creates.)
Young Spade
Apr 16, 01:55 PM
You are so humorous. Of course what i want is a netbook not a bag.:p
I want to buy one online as I think it would be cheaper. What is your opinion?
Haha oh ok :)
Well yea you're on a Mac forum so you're going to get a lot of Mac replies... which IMO is all you need ;)
But seriously... if you want extreme portability a MBA will do great... the 13 inch ones are slim and have amazing battery life; if you're willing to get the 1.4/1.6ghz dual core instead of a 2.x one (dual), then you should be set. They all have the glass trackpad which is great as well.
Like I posted before though, I would suggest a MBP. They are still very portable and small in size compared to other laptops and have a performance (and build) increase compared to the regular, polycarbonate Macs.
What are you planning on doing with your computer? Where are you taking it? These things would help us out a lot :)
I want to buy one online as I think it would be cheaper. What is your opinion?
Haha oh ok :)
Well yea you're on a Mac forum so you're going to get a lot of Mac replies... which IMO is all you need ;)
But seriously... if you want extreme portability a MBA will do great... the 13 inch ones are slim and have amazing battery life; if you're willing to get the 1.4/1.6ghz dual core instead of a 2.x one (dual), then you should be set. They all have the glass trackpad which is great as well.
Like I posted before though, I would suggest a MBP. They are still very portable and small in size compared to other laptops and have a performance (and build) increase compared to the regular, polycarbonate Macs.
What are you planning on doing with your computer? Where are you taking it? These things would help us out a lot :)
more...
ryan0402
Sep 24, 06:40 PM
I am bying the ipod 4 but love the iphone 4 form factor. I am not going to go out and buy and iphone so I was wondering what case would work with the ipod 4mto make it feel like the iphone 4.
redman042
Feb 12, 10:28 AM
FOR THE LOVE OF GOD, JUST GET A BUMPER AND BE DONE WITH IT.
I hate new iPhone launches, because they turn the MacRumors forums into a peanut gallery for about two months. Ugh!
I hate new iPhone launches, because they turn the MacRumors forums into a peanut gallery for about two months. Ugh!
more...
Hrududu
Apr 25, 11:46 PM
Just to clarify, it does chime and the light on the front does fade to off after its turned on right? If its doing all that, its most likely a bad graphics chip.
Insilin1i
Mar 25, 02:08 PM
Sherway Gardens usually has less people lined up since it is not very easy to get their by TTC. Well it had less people during the iPhone 4 launch compared to some of the other malls.
more...
mBox
Apr 5, 11:33 AM
Budget - I would like to keep it under $800
Lighting conditions - should be very good as I will normally be shooting in daylight and clear weather.
Mics - I don't have any but will get whatever is required. I was going to add most of the audio after the fact for clarity's sake.
Edit - Not sure. Whatever is most friendly and easy to work with.
Output - This will be video content for my website.
Basically...I am a contractor that wants to post of some video of completed jobs with some audio about what we do and why.Ive actually had decent results with the GoPro as far as a cheap camera goes. With your above requests that camera would suffice. However I wouldnt use it for ENG, Docs (well maybe as B-roll) or anything thatll need low-light.
Now of your budget is over 1k then we can talk better cameras ;)
Currently testing a Sony PMW-F3. Its the new Sony HD camera that can handle all kinds of lenses (PL yada yada).
We generally use the high-end stuff here at work e.g. RED MX but at times we have to purchase and assess lower end cameras for other depts.
Lighting conditions - should be very good as I will normally be shooting in daylight and clear weather.
Mics - I don't have any but will get whatever is required. I was going to add most of the audio after the fact for clarity's sake.
Edit - Not sure. Whatever is most friendly and easy to work with.
Output - This will be video content for my website.
Basically...I am a contractor that wants to post of some video of completed jobs with some audio about what we do and why.Ive actually had decent results with the GoPro as far as a cheap camera goes. With your above requests that camera would suffice. However I wouldnt use it for ENG, Docs (well maybe as B-roll) or anything thatll need low-light.
Now of your budget is over 1k then we can talk better cameras ;)
Currently testing a Sony PMW-F3. Its the new Sony HD camera that can handle all kinds of lenses (PL yada yada).
We generally use the high-end stuff here at work e.g. RED MX but at times we have to purchase and assess lower end cameras for other depts.
Osarkon
Apr 6, 01:45 PM
MGS: PO will definitely keep you going, got it yesterday and yikes it's frustatingly hard compared to the old ones and a whole lot more complex. It's easily kept me going 24 hours. :D
InuNacho
Oct 1, 01:40 AM
Hey everyone I'm not sure if this is the right section for this, so if it isn't please point me in the right direction.
Anyhow I recently "found" a Macintosh TV, did a fresh install of System 7.1, hooked up my Genesis and... it seems like I'm missing half the frames per second. Both RF and video in have the same problem.
I've changed the very limited options in both TV Setup and Monitors and I still have the same problem. Will installing 7.6 change anything or am I stuck missing half the frames?
EDIT: Ok it's not half the frames missing but it's still noticeable. Also is there a way to adjust the picture quality, the video in is extremely blurry with multicolored artifacts everywhere.
Anyhow I recently "found" a Macintosh TV, did a fresh install of System 7.1, hooked up my Genesis and... it seems like I'm missing half the frames per second. Both RF and video in have the same problem.
I've changed the very limited options in both TV Setup and Monitors and I still have the same problem. Will installing 7.6 change anything or am I stuck missing half the frames?
EDIT: Ok it's not half the frames missing but it's still noticeable. Also is there a way to adjust the picture quality, the video in is extremely blurry with multicolored artifacts everywhere.
arn
May 3, 04:51 PM
thanks. I'm looking into this. If it happens again with a different domain, please let me know.
arn
arn
noxtos
Mar 29, 05:48 PM
Still no scanner support for MP600.....
The MP600 scanner drivers are available from the canon web site. I wonder why Apple did not include them.
Navigate to http://software.canon-europe.com/products/0010396.asp, select Mac OS X, and click submit to filter non-OS X drivers. The file is named 'ScanGear CS for OS X (12.13.1)'. It's located quite at the bottom of the list.
The MP600 scanner drivers are available from the canon web site. I wonder why Apple did not include them.
Navigate to http://software.canon-europe.com/products/0010396.asp, select Mac OS X, and click submit to filter non-OS X drivers. The file is named 'ScanGear CS for OS X (12.13.1)'. It's located quite at the bottom of the list.
mad jew
Dec 16, 06:20 PM
I was worried that'd be the case. I reckon you're best bet might be to take it back to Apple quickly if it's not too much trouble for you. They should be very good about fixing it considering it stopped working under their watch. Sorry I can't be more helpful. :o
Phil A.
May 6, 11:08 AM
Why don't you try one of these many jailbreaks you have "seen online" instead of posting this ridiculous thread, you could even use the search option, I would go as far as to say that it would be front page news on macrumors if it had happened anywhere other than in your imagination!
HAHAHA :D:D:D:D:D that was good...
OP - if you were in any doubt following these replies, the answer is no - there is currently no jailbreak for iPad 2 ;)
HAHAHA :D:D:D:D:D that was good...
OP - if you were in any doubt following these replies, the answer is no - there is currently no jailbreak for iPad 2 ;)
Black&Tan
Jul 23, 08:13 AM
I would suggest checking the iPhone forum for similar issues and suggestions....
I believe the latest suggestion is to shut the ipod/iphone off, plug it into the head unit, and then restart the ipod.
Another option was to "re-pair" the device with the head unit.
I believe the latest suggestion is to shut the ipod/iphone off, plug it into the head unit, and then restart the ipod.
Another option was to "re-pair" the device with the head unit.
No comments:
Post a Comment